STP-36-NE – Ford F-550 4×2 Steel Body

Bucket Truck for Sale – VERSALIFT STP-36-NE a non-insulated, end mounted 35 ft. 6 in. (10.8 m) telescopic articulating aerial platform lift, 40 ft. 6 in. (12.3 m) working height including the following standard and optional features:

• Max combined capacity platform load plus cable down load is 350 lbs. (158.7 kg).
• Max cable download is 50 lbs.
• Upper controls consist of a single stick, toggle switches and emergency stop.
• Heavy duty intercom system for communication between cab and platform.
• Engine start/stop system with controls at platform and remote handheld lower controls.
• 370° non-continuous rotation with a mechanical stop.
• Open center hydraulic system operates at 1.5 to 2 GPM (6-8 LPM) at 2000 psi (140 kg/cmۜ)
• External hydraulic oil reservoir with 6 gal. (23 l) capacity.
• Outer boom consists of a 6 in. X 8 in. (150 mm x 200 mm) steel section
• 5 in. X 7 In. (130 mm x 180 mm) rectangular aluminum inner boom is housed within the outer boom.
• End mounted walk in 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fabricated steel tube platform includes hinged door with slam latch and safety chain.
• Master/slave hydraulic leveling with control to tilt for cleanout or rescue.
• Non‑lube bearings used at all pivot points.
• Multi‑link hose carrier system through booms.
• Rubberized boom cradle
• Backup pump providing power to all boom functions and emergency lowering.
• Mounting hardware for chassis/cab installation.
• Handheld remote lower control with series of spring loaded toggle switches and control selector switch
• GFCI receptacle for 120 volt power at platform
• Single pneumatic airline to platform.
• Full body harness and lanyard.
• Painted standard white urethane.
• Two operator’s manuals and two service manuals.
• ANSI A92.2 data plate.

Dakota Service Body 132” Long x 40” High x 94” Wide:

• 12 gauge tread plate floor with 6” structural channel frame
• 40 in. compartment height, 20 in. compartment depth, 54 in. floor width.
• Stainless steel automotive rotary type door latches and chain stops on all doors
• Rubber rolled crown type fenders
• 30” tread plate tail shelf with 7-lamp light bar and two (2) oval cutouts for strobe lights
• Curbside single recessed step with belt step and grab handles
• Master door lock, hook and loop system on each door with two (2) spring loaded door handles (unlocked)
• Wheel chock holders curbside
• Removable composite tailgate installed at rear of load space.

Curb side compartments as follows:

• 1^st Vertical: Two (2) adjustable shelves with adjustable dividers.
• 2^nd Vertical: Access steps to bed with cable access step and removable composite side gate.
• Horizontal: Open
• Rear Vertical: Five (5) fixed material hooks (1-3-1)

Street Side Compartments as follows:

• 1^st Vertical: Two (2) adjustable shelves with adjustable dividers.
• 2^nd Vertical: Two (2) adjustable shelves with adjustable dividers.
• Horizontal: One (1) adjustable shelf with dividers.
• Rear Vertical: Five (5) fixed material hooks (1-3-1)

Cab and chassis to the following specifications:

• 2019 Ford F-550 4×2 cab and chassis.
• GVWR 19,500 lb. payload plus upgrade package.
• 84” cab to axle.
• 8L 3-valve SOHC EFI V10 gasoline engine
• TorqShift 6-speed automatic transmission includes SelectShift.
• 88 limited slip axle.
• Air conditioning.
• 225/70R19.5G BSW AS tires.
• Snow plow prep package.
• Aft-Axle frame extension pack.
• Trailer brake controller (TBC)
• Rear view camera and prep kit
• AM/FM radio.
• Painted Oxford White.

Installation to include the following:

• Install VERSALIFT STP-36-NE, mounting hardware, PTO and pump.
• Install rear torsion bar and ballast.
• Install and paint Dakota service body and accessories.
• Install ladder rack with hold down and locking feature.
• Install two (2) knuckle mounted amber strobe lights
• Install two (2) amber strobe lights in tail shelf and two (2) strobes lights in front grill
• Install Dimensions Pure Sine inverter with battery and box.
• Install combination pintle hitch with 2” ball, D rings and 7 prong trailer connector
• Install mud flaps and back up alarm
• Furnish fire extinguisher, 3 piece triangle reflector kit and pair of rubber wheel chocks.
• Test ride completed unit for 1 hour.
• Test and certify per ANSI A92.2.