Freightliner M2 106 4X4 Fiberglass Body

Articulated Telescopic

Working Height: 65.08 ft (19.81 m)

Horizontal Reach: 38.75 ft (11.58 m)

Platform Capacity: 650 lbs (294.83 kg)

• Industry leading payload due to smarter, lightweight aerial lift design

• Unprecedented Lineman Protection at the Platform

• Ease of Maintenance: Non-lube bearings, open center system


(images shown for reference)


Electric Power Distribution, Electric Utilities
Articulated Telescopic

Product Overview

Working Height
65.08 ft (19.81 m)
Horizontal Reach
38.75 ft (11.58 m)
Platform Capacity
650 lbs (294.83 kg)
Material Handling
Available subject to prior sale
Sales Representative
Michael C. O’Flaherty
Retail Price
Please Contact Us


Bucket truck for Sale – VERSALIFT VST-6000-MHI-03, insulated 60 ft. (18.3 m) telescopic aerial platform lift, 65 ft. (19.8 m) working height including the following items:

  • Standard platform capacity of 650 lbs. with platform elevator but without jib and winch attached.
  • Platform capacity with the jib and winch and platform elevator is 500 lbs.
  • VERSALIFT TruGuard™ dielectric isolating system with RH single stick control. All control handles are isolated and tested per ANSI A92.2 2009. The high resistive dielectric system is protected from direct environmental and job related contamination. TruGuard™ technology incorporates the use of full hydraulic controls with durable metal handles and linkages. Includes 180° platform rotator.
  • Platform elevator allowing operator 24 in. additional height from standard.
  • Hydraulic dual arm articulating jib pole and winch package for up to 1000 lbs. (454 kg) maximum capacity.
  • Radio controlled remote engine start/stop and emergency power from platform
  • Continuous rotation
  • 5 GPM open center hydraulic system with a 2250 psi (158 kg/cm²) operating pressure.
  • Side mounted telescopic upper boom allows low stowing of platform. Fiberglass inner boom provides
  • insulation gap of 48 inches fully retracted meeting ANSI A92.2.
  • Chassis insulating system (fiberglass lower boom insert) providing 24 in. (0.61 m) insulation gap and including accommodations to bridge insulation gap for testing per ANSI A92.2.
  • ANSI A92.2 Category B 69 KV rating including test bends on inner boom.
  • Inner boom finished with white urethane paint over a white gel coat.
  • Non-lube bearings used throughout.
  • One set of hydraulic tool outlets at platform. Quick disconnect fittings included.
  • Tubular pedestal including sub frame mounted A-frame outriggers with pivot feet, two control valves, and a selector valve.
  • Auxiliary outriggers with pivot feet and two control valves
  • Outrigger boom interlock system for main and auxiliary outriggers
  • Integral reservoir with a 25-gallon (94.5 l) capacity and dual sight gauges.
  • Closed heavy-duty one-step 24 in. X 48 in. X 42 in. (0.61m X 1.22m X 1.07m) fiberglass platform.
  • Platform liner and vinyl cover.
  • Master/slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
  • 12V DC backup pump
  • Automatic boom latch for upper boom
  • Full length sub frame with tubular rubber platform support
  • Painted Time standard White Urethane
  • Two safety harnesses and lanyards.
  • Two operator manuals and service manuals 

Cab and chassis specifications include the following:

  • Freightliner M2 106 4X4 cab and chassis
  • Cummins ISB 260 HP diesel engine
  • Allison 3500 RDS automatic transmission
  • 33,000 lb. GVWR: 13,220 lb. front GAWR (14,600 lb. suspension) and 21,000 lb. rear GAWR (23,000 lb. suspension)
  • 5×8.25 painted steel disc wheels with 11R22.5 Continental tires.
  • 108 inch C.A.
  • Engine block heater with socket located below driver’s door
  • Air brake system
  • Back up alarm
  • Air conditioning
  • AM/FM radio
  • Painted White Elite

Brand FX 102T fiberglass line body with the following specifications:

  • Aluminum tread plate floor and steel understructure
  • Compartment height-48 inches and compartment depth-18 inches
  • Flexglo compartment lights mounted in top and sides of all compartments
  • LED lighting package with standard backup light
  • Stainless steel rotary latches and hardware
  • Clear vinyl rock guards
  • Aluminum tread plate tail shelf
  • Wheel chock storage
  • Master locking system excluding 1st vertical curbside

Street side compartments:

  • 1st Vertical – Two (2) adjustable shelves with dividers
  • 2nd Vertical – Two (2) adjustable shelves with dividers
  • 3rd Vertical – Three (3) adjustable shelves with dividers
  • Horizontal – One (1) fixed shelf with dividers and divider tray
  • Rear Vertical – Five (5) locking swivel hooks

Curbside compartments:

  • 1st Vertical Two (2) adjustable shelves with dividers
  • 2nd Vertical – Access steps to bed area with grab handle and cable step
  • 3rd Vertical – Three (3) adjustable shelves with dividers
  • Horizontal – One (1) adjustable shelf with dividers
  • Rear Vertical – Five (5) locking swivel hooks

Installation includes the following:

  • Install VERSALIFT VST-6000-MHI, mounting hardware, ballast, PTO and pump.
  • Install Brand FX Line Body and accessories.
  • Install main and auxiliary outriggers, BP-100A pintle hitch, reinforcements, and 7 prong trailer connector
  • Install two (2) amber strobe light in rear tail shelf and two (2) strobe lights in front grill.
  • Install mud flaps, outrigger pad holders, slope indicators, access steps and handrails.
  • Relocate glad hands to rear of chassis
  • Install grounding kit system, park brake interlock system and quick disconnect fittings.
  • Paint black non-skid on body floor.
  • Furnish outrigger pads, wheel chocks, fire extinguisher, and 3 piece triangle reflector kit.
  • Test ride completed unit for one (1) hour.
  • Test and certify per ANSI A92.2