STP-36-NE Chevrolet 5500 4×2 Steel Body

STP-36-NE Chevrolet 5500 4×2 Steel Body

Insulated - Cable Placer

  • Designed and certified for towering
  • Single stick, two speed platform control
  • Ease of Maintenance: Non-lube bearings, open center system

Product Overview

Working height:
40.5'
Horizontal Reach:
26.5'
Platform Capacity:
400 lbs
Material Handling:
No
Insulation:
No
Condition:
New
Category:
Completed Units
Industries:
Telecommunications
Manufacturer:
Versalift
Location:
Waco, TX
Retail Price:
Please Contact Us
Download Specification Sheet

Description

VERSALIFT STP-36-NE a non-insulated, end mounted 35 ft. 6 in. (10.8 m) telescopic articulating aerial platform lift, 40 ft. 6 in. (12.3 m) working height including the following standard and optional features:

  • Max combined capacity platform load plus cable download is 350 lbs. (158.7 kg).
  • Max cable download is 50 lbs.
  • Upper controls consist of a single stick, toggle switches and emergency stop.
  • Heavy duty intercom system for communication between cab and platform.
  • Engine start/stop system with controls at platform and remote handheld lower controls.
  • 370° non-continuous rotation with a mechanical stop.
  • Open center hydraulic system operates at 1.5 to 2 GPM (6-8 LPM) at 2000 psi (140 kg/cmۜ)
  • External hydraulic oil reservoir with 6 gal. (23 l) capacity.
  • Outer boom consists of a 6 in. X 8 in. (150 mm x 200 mm) steel section
  • 5 in. X 7 In. (130 mm x 180 mm) rectangular aluminum inner boom is housed within the outer boom.
  • End mounted walk in 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fabricated steel tube platform includes hinged door with slam latch and safety chain.
  • Master/slave hydraulic leveling with control to tilt for cleanout or rescue.
  • Non‑lube bearings used at all pivot points.
  • Multi‑link hose carrier system through booms.
  • Rubberized boom cradle
  • Backup pump providing power to all boom functions and emergency lowering.
  • Mounting hardware for chassis/cab installation.
  • Handheld remote lower control with series of spring loaded toggle switches and control selector switch
  • GFCI receptacle for 120 volt power at platform
  • Single pneumatic airline to platform.
  • Full body harness and lanyard.
  • Painted standard white urethane.
  • Two operator’s manuals and two service manuals.
  • ANSI A92.2 data plate.

Knapheide Service Body 132” Long x 40” High x 94” Wide:

  • 12-gauge tread plate floor with 6” structural channel frame
  • 40 in. compartment height, 20 in. compartment depth, 54 in. floor width.
  • Stainless steel automotive rotary type door latches and chain stops on all doors
  • Rubber rolled crown type fenders
  • 30” tread plate tail shelf with curbside single recessed step with belt step and grab handles
  • Master door lock, hook and loop system on each door with two (2) spring loaded door handles (unlocked)
  • Wheel chock holder’s curbside
  • Removable composite tailgate installed at rear of load space

Curb side compartments as follows:

  • 1st Vertical: Two (2) adjustable shelves with adjustable dividers
  • 2nd Vertical: Access steps to bed with cable access step and removable composite side gate
  • Horizontal: Open
  • Rear Vertical: Five (5) fixed material hooks (1-3-1)

Street Side Compartments as follows:

  • 1st Vertical: Two (2) adjustable shelves with adjustable dividers
  • 2nd Vertical: Two (2) adjustable shelves with adjustable dividers
  • Horizontal: One (1) adjustable shelf with dividers
  • Rear Vertical: Five (5) fixed material hooks (1-3-1)

Cab and chassis to the following specifications:

  • 2023 Chevrolet 5500 HD cab and chassis
  • GVWR 19,500 lb. payload
  • 84” cab to axle
  • Duramax 6.6L Turbo-Diesel V8
  • Allison 6-speed automatic transmission
  • Limited slip axle
  • Remote keyless entry
  • 225/70R19.5G BSW Goodyear tires
  • Rear view camera
  • 7″ infotainment center
  • Painted Summit White

Installation to include the following:

  • Install VERSALIFT STP-36-NE, mounting hardware, PTO and pump.
  • Install rear torsion bar.
  • Install and paint service body and accessories.
  • Install ladder rack with hold down and locking feature.
  • Install two (2) knuckle mounted amber strobe lights.
  • Install two (2) amber strobe lights in tail shelf and two (2) strobes lights in front grill.
  • Install inverter with battery and box.
  • Install combination pintle hitch with 2” ball, D rings and 7 prong trailer connector.
  • Install mud flaps and back up alarm.
  • Furnish fire extinguisher, 3 piece triangle reflector kit and pair of rubber wheel chocks.
  • Test ride completed unit for 1 hour.
  • Test and certify per ANSI A92.2

Related products

Versalift US designs and manufactures high-quality aerial lifts, bucket trucks, digger derricks, and specialized access equipment for industries like electric utility, telecommunications, forestry, and lighting. Our products are built for safety, reliability, and long-term performance in the most demanding work environments.

Safety First

Advanced safety features like TruGuard™ and SlopeMax.

Quality Assurance

Our QA247 is the foundation of every product we assemble.

Lighter Build

Heavyweight Performance – Best in class payloads and lighter chassis options.

Easy to Service

We design our products with easy maintenance in mind.

Get in Touch with Versalift

Have questions about our bucket trucks or need help finding the right solution? Fill out the form below, and a member of our team will get back to you shortly.