Bucket Truck for Sale – VERSALIFT SST-36-NE a non-insulated, end mounted 35 ft. 6 in. (10.8 m) telescopic articulating aerial platform lift, 40 ft. 6 in. (12.3 m) working height including the following standard and optional features:
- Standard platform capacity of 350 lbs. (158.7 kg).
- Upper controls consist of a series of spring loaded toggle switches and a master control switch.
- Engine start/stop system with controls at platform and remote handheld lower controls.
- 370° non-continuous rotation with a mechanical stop.
- Open center hydraulic system operates at 1.5 to 2 GPM (6-8 LPM) at 2000 psi (140 kg/cmۜ)
- External hydraulic oil reservoir with 6 gal. (23 l) capacity.
- Outer boom consists of a 6 in. X 8 in. (150 mm x 200 mm) steel section
- 5 in. X 7 In. (130 mm x 180 mm) rectangular aluminum inner boom housed within the outer boom.
- End mounted walk in 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fiberglass platform.
- Manual rotator for platform.
- Master/slave hydraulic leveling with upper control to tilt for cleanout or rescue.
- Non‑lube bearings used at all pivot points.
- Multi‑link hose carrier system through booms.
- Rubberized boom cradle
- 12 volt DC backup pump providing power to all boom functions.
- Mounting hardware for chassis/cab installation.
- Handheld remote lower control with series of spring loaded toggle switches and control selector switch
- GFCI receptacle for 120 volt power at platform
- Full body harness and lanyard.
- Painted standard white urethane.
- Two operator’s manuals and two service manuals.
- ANSI A92.2 data plate.
Steel Service Body 108” Long x 40” High x 94” Wide:
- 12 gauge tread plate floor with 6” structural channel frame
- 40 in. compartment height, 20 in. compartment depth, 54 in. floor width.
- Stainless steel automotive rotary type door latches.
- Chain stops on all doors
- Rubber rolled crown type fenders
- Removable composite tailboard installed at rear.
- 30” tread plate tail shelf with 7-lamp light bar installed.
- Master locking system.
- Curb side compartments as follows:-
- 1st Vertical: Two (2) adjustable shelves with adjustable dividers on 4 inch centers
- Horizontal: Open
- Rear Vertical: Two (2) adjustable shelves with adjustable dividers on 4 inch centers
- Street Side Compartments as follows:-
- 1st Vertical: Two (2) adjustable shelves with adjustable dividers on 4 inch centers
- Horizontal: One (1) removable shelf with dividers on 6 inch centers
- Rear Vertical: Five (5) fixed material hooks (1-3-1)
Cab and chassis to the following specifications:
- Ford F-450 4×2 cab and chassis with a 60” cab to axle.
- 16,000 lb. GVWR.
- 3L 2V DEVCT NA V8 gasoline engine
- TorqShift 10-speed automatic transmission.
- 88 limited slip axle.
- 225/70R19.5G BSW A/P tires.
- Air Conditioning
- XL value package includes 4.2”center-stack screen and SYNC communications system
- Power equipment package includes power windows, door locks and remote keyless entry.
- Steering wheel mounted cruise control.
- Radio: AM/FM stereo/MP3 player.
- Trailer brake controller
- Snow plow prep package.
- Rear view camera and prep kit.
- Painted Oxford White.
Installation to include the following:
- Install VERSALIFT SST-36-NE, mounting hardware, and belt drive system.
- Install rear torsion bar.
- Install and paint Dakota service body and accessories.
- Install ladder rack with hold down and locking feature.
- Install two (2) amber strobe lights in tail shelf and two (2) strobes lights in front grill
- Install Dimensions 2000 watt Pure Sine inverter with battery and box (curbside front compartment)
- Install combination pintle hitch with 2” ball, D rings and 7 prong trailer connector
- Install mud flaps, back up alarm and park brake interlock system.
- Furnish fire extinguisher, 3 piece triangle reflector kit and pair of rubber wheel chocks.
- Test ride completed unit for 1 hour.
- Test and certify per ANSI A92.2.