VERSALIFT STP-36-NE a non-insulated, end mounted 35 ft. 6 in. (10.8 m) telescopic articulating aerial platform lift, 40 ft. 6 in. (12.3 m) working height including the following standard and optional features:
- Max combined capacity platform load plus cable download is 350 lbs. (158.7 kg).
- Max cable download is 50 lbs.
- Upper controls consist of a single stick, toggle switches and emergency stop.
- Heavy duty intercom system for communication between cab and platform.
- Engine start/stop system with controls at platform and remote handheld lower controls.
- 370° non-continuous rotation with a mechanical stop.
- Open center hydraulic system operates at 1.5 to 2 GPM (6-8 LPM) at 2000 psi (140 kg/cmۜ)
- External hydraulic oil reservoir with 6 gal. (23 l) capacity.
- Outer boom consists of a 6 in. X 8 in. (150 mm x 200 mm) steel section
- 5 in. X 7 In. (130 mm x 180 mm) rectangular aluminum inner boom is housed within the outer boom.
- End mounted walk in 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fabricated steel tube platform includes hinged door with slam latch and safety chain.
- Master/slave hydraulic leveling with control to tilt for cleanout or rescue.
- Non‑lube bearings used at all pivot points.
- Multi‑link hose carrier system through booms.
- Rubberized boom cradle
- Backup pump providing power to all boom functions and emergency lowering.
- Mounting hardware for chassis/cab installation.
- Handheld remote lower control with series of spring loaded toggle switches and control selector switch
- GFCI receptacle for 120 volt power at platform
- Single pneumatic airline to platform.
- Full body harness and lanyard.
- Painted standard white urethane.
- Two operator’s manuals and two service manuals.
- ANSI A92.2 data plate.
Knapheide Service Body 132” Long x 40” High x 94” Wide:
- 12-gauge tread plate floor with 6” structural channel frame
- 40 in. compartment height, 20 in. compartment depth, 54 in. floor width.
- Stainless steel automotive rotary type door latches and chain stops on all doors
- Rubber rolled crown type fenders
- 30” tread plate tail shelf with curbside single recessed step with belt step and grab handles
- Master door lock, hook and loop system on each door with two (2) spring loaded door handles (unlocked)
- Wheel chock holder’s curbside
- Removable composite tailgate installed at rear of load space
Curb side compartments as follows:
- 1st Vertical: Two (2) adjustable shelves with adjustable dividers
- 2nd Vertical: Access steps to bed with cable access step and removable composite side gate
- Horizontal: Open
- Rear Vertical: Five (5) fixed material hooks (1-3-1)
Street Side Compartments as follows:
- 1st Vertical: Two (2) adjustable shelves with adjustable dividers
- 2nd Vertical: Two (2) adjustable shelves with adjustable dividers
- Horizontal: One (1) adjustable shelf with dividers
- Rear Vertical: Five (5) fixed material hooks (1-3-1)
Cab and chassis to the following specifications:
- 2023 Chevrolet 5500 HD cab and chassis
- GVWR 19,500 lb. payload
- 84” cab to axle
- Duramax 6.6L Turbo-Diesel V8
- Allison 6-speed automatic transmission
- Limited slip axle
- Remote keyless entry
- 225/70R19.5G BSW Goodyear tires
- Rear view camera
- 7″ infotainment center
- Painted Summit White
Installation to include the following:
- Install VERSALIFT STP-36-NE, mounting hardware, PTO and pump.
- Install rear torsion bar.
- Install and paint service body and accessories.
- Install ladder rack with hold down and locking feature.
- Install two (2) knuckle mounted amber strobe lights.
- Install two (2) amber strobe lights in tail shelf and two (2) strobes lights in front grill.
- Install inverter with battery and box.
- Install combination pintle hitch with 2” ball, D rings and 7 prong trailer connector.
- Install mud flaps and back up alarm.
- Furnish fire extinguisher, 3 piece triangle reflector kit and pair of rubber wheel chocks.
- Test ride completed unit for 1 hour.
- Test and certify per ANSI A92.2