Bucket truck for Sale – VERSALIFT VST-50-TN, non-insulated 49 ft. 11 in (15.2 m) telescopic articulating aerial platform lift, 54 ft. 11 in (16.7 m) working height with a horizontal reach of 30 ft. 7 in (9.3 m) including the following items:
- Maximum platform capacity of 500 lbs. (227 kg)
- Steel platform 36in. x 60 in. x 43 in. (0.9 m x 1.5 m x 1.1 m) with a duck under opening for easy access
- Platform mounted full pressure UNITROL single lever control including safety trigger, emergency stop, and tool selector
- 180o hydraulic platform rotation
- Full pressure turret mounted lower controls including override.
- Engine start/stop control from platform and lower controls
- 360 o continuous rotation
- Six gpm (22.7 lpm) open center hydraulic system with a 3000 psi (210 kg/cm²) operating pressure
- Non-lube bearings used throughout. Only the rotation bearing requires periodic lubrication.
- One set of hydraulic tool outlets at platform. Quick disconnect fittings included.
- Tubular pedestal with integral reservoir with a 17 gallon (64.4 l) capacity and dual sight gauges.
- Outer/inner boom assembly includes steel outer boom, steel telescopic inner boom, extension system and hose assemblies.
- Lower boom assembly consists of a steel lower boom actuated buy a double acting cylinder with two integral holding valves.
- Main and auxiliary outriggers with control valves and selector with pivoting feet
- Outrigger boom interlock system for outriggers
- Master/slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
- GFCI receptacle at platform for 120V
- Back up 12V DC hydraulic system
- Upper boom storage cradle with tie down strap
- Hydraulic jib and winch package for up to 200 lbs. (90 kg) maximum capacity
- Painted white urethane
- Two safety harnesses and lanyards.
- Two operator manuals and service manuals
Service Body 132” Long x 48/40” High x 94” Wide to include the following:
- Stainless steel automotive rotary type door latches.
- Chain stops on all doors
- Rubber rolled crown type fenders
- 30” tread plate tail shelf with 7-lamp light bar installed.
- Master door locking system.
- Curb side compartments as follows:-
- 1st Vertical: Two (2) adjustable shelves with adjustable dividers on 2 inch centers
- 2nd Vertical: Grip struct access steps to bed area with rubber belt type step and two (2) chrome bolt on handles.
- Horizontal: One adjustable shelf with divider slots on 2 inch centers
- Rear Vertical: Five (1-3-1) round stock fixed material hooks
- Street Side Compartments as follows:-
- 1st Vertical: Two (2) adjustable shelves with adjustable dividers on 2 inch centers
- 2nd Vertical: Two (2) adjustable shelves with adjustable dividers on 2 inch centers
- Horizontal: Eight (8) adjustable dividers installed on compartment bottom
- Rear Vertical: Two (2) adjustable shelves with adjustable dividers on 2 inch centers
- Hot stick shelf with rear drop down access door
Cab and chassis to the following specifications:
- Ford F-550 4×2 cab and chassis with 84”CA.
- GVWR 19,500 lb. payload plus upgrade package.
- XL Value Package includes 4.2” center-stack screen and SYNC communications system
- Power equipment package includes power windows, door locks and remote keyless entry.
- Steering wheel mounted cruise control.
- 3L 2V DEVCT NA PFI V8 gasoline engine
- TorqShift 10-speed automatic transmission.
- 88 limited slip axle.
- Air conditioning.
- 225/70R19.5G BSW AP tires.
- Snow plow prep package.
- Aft-Axle frame extension pack.
- Trailer brake controller (TBC)
- Rear view camera and prep kit
- AM/FM stereo/MP3 player radio.
- Painted Oxford White.
Installation to include the following:
- Install VERSALIFT VST-50-TN, mounting hardware, with PTO and pump.
- Install and paint service body and accessories.
- Install ladder rack with hold down and locking feature.
- Install two (2) amber strobe lights in tail shelf and two (2) strobes lights in front grill
- Install Dimensions 2000 watt Pure Sine inverter with battery and box (curbside front compartment)
- Install combination pintle hitch with 2” ball, D rings and 7 prong trailer connector
- Install mud flaps, back up alarm and park brake interlock system.
- Furnish fire extinguisher, 3 piece triangle reflector kit and pair of rubber wheel chocks.
- Test ride completed unit for 1 hour.
- Test and certify per ANSI A92.2.